C0996 Subaru Auto Trouble Code

C0996 Subaru Auto Trouble Code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

The computer notices the canister is empty when it detects a leaner condition (all the vapors are used up) and it resumes normal fuel delivery. Some car manufacturers then close the vent solenoid but leave the purge solenoid open. That creates a vacuum throughout the entire fuel storage system. Once the correct vacuum is reached, it closed the purge solenoid and waits to see if the vacuum holds.

C0996 Subaru Possible Solution:

Power Steering Pressure (PSP) Switch Signal Malfunction The PCM counts the number of times vehicle speed transitions from 0 to a calibratable speed. After a calibratable number of speed transitions the PCM expects that the PSP input should have changed. This DTC is set if the transition is not detected. Vehicle towed with engine running Power steering hydraulic concern was repaired but DTC was not erased PSP switch/shorting bar damaged SIG RTN circuit open PSP circuit open or shorted to SIGRTN PCM damaged Check, if possible, if vehicle was towed or power steering service was performed. Observe PSP V PID while checking wires for intermittents.

C0996 Subaru Description For All Models :

Subaru 1.8
Subaru 1400
Subaru 1600
Subaru 360
Subaru Alfa
Subaru B11
Subaru B9
Subaru Baja
Subaru Coupe
Subaru Dl
Subaru Ff-1
Subaru Forester
Subaru Forester 1
Subaru Forester 2
Subaru Forester 3
Subaru G3x
Subaru G3x Justy
Subaru H6
Subaru Hm
Subaru Impreza
Subaru Impreza 2
Subaru Impreza 3
Subaru Justy
Subaru K111
Subaru Legacy
Subaru Legacy 3
Subaru Legacy 4
Subaru Leone
Subaru Liberty
Subaru M80
Subaru Mini Jumbo
Subaru Outback
Subaru Outback 2
Subaru Outback 3
Subaru Pleo
Subaru R1
Subaru R2
Subaru Rex
Subaru Sagres
Subaru Stella
Subaru Stx
Subaru Svx
Subaru Traviq
Subaru Tribeca
Subaru Vivio
Subaru Wx
Subaru Xt
Subaru Xv

C0996 Subaru Trouble Repair :

If your C0996 Subaru check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system and engine control unit are in charge of monitoring a bunch of different, and if they get a reading that's a little out of whack, up pops the check engine light.

Code Search

Please fill the search bar to find Auto Trouble Code meaning.

	Example: 0120